A specially formulated acidic gel for the removal of rust, iron mould and old blood stains on carpet and fabric. Rust Remover is ready-to-use. Shake before using. Always pre-test fibres and fabrics in an inconspicuous location for suitability and colour fastness. Some fabrics and dyes may be sensitive to acidic solutions. Apply Rust Remover directly to the rust spot. Avoid over-application. Allow several minutes contact time. Agitate gently during this time with a brush or scraper. Blot and extract area thoroughly with clear water. Repeat steps above if necessary. Groom carpet or fabric to align fibres. Note: Old rust spots will require longer contact time than fresh rust spots. Agitation speeds rust spot removal. Thorough extraction will prevent re-appearance of rust spot.
Formulation:
Appearance: Clear Yellow
Odour: Winterfresh
Solubility: Not determined
PH Value Cons: 1
PH Value Diluted: N/A
Storage:
Store in closed original container at temperature between 5°C and 30°C.
Health & Safety Information:
Ingestion: Do not induce vomiting. Immediately rinse mouth and drink plenty of water (200-300ml). Do not give victim anything to drink if they are unconscious. Get medical attention immediately.
Skin contact: Wash skin thoroughly with soap and water. Get medical attention if irritation persists after washing.
Eye contact: Immediately flush with plenty of water for up to 15 minutes. Remove any contact lenses and open eyes wide apart. Get medical attention if any discomfort continues.
PPE Required:
Eye goggles and gloves.
| Brand | Prochem |
|---|